Parkland Mower


The Parkland Mower is designed for large areas such as parks, golf courses, sports ovals, and airports. It has four independent ground hugging decks that follow contours and undulations. The machine cuts fairways, tees, and rough so that one machine will do the work of three. With a cut width of 3.7m up to 4 ha/hr can be achieved in suitable conditions and a golf course can be completed in six to eight hours.

Features

  • Fine finish cutting.
  • Can be used as a twin, triple, or four deck mower.
  • Independent decks give full coverage of undulating areas such as fairways.
  • A full 3.7 metre cut.
  • Specially developed blade rotation settings ensure blades enter trampled grass
  • Gives a clean, even cut.
  • Unique deck frame mountings allow the decks to paddle up and down independently
  • Follows ground contours.
  • Outer decks can fold to allow mowing down the centre of ridges or drains.
  • Outer decks can be folded and locked for transport.
  • All 12 wheels are adjustable to give accuracy when setting deck heights.
  • Fully covered front drive section for safety and lower maintenance.
  • Trailing Format allows use by a wide range of tractors

OVERALL WIDTH 3860mm WORKING 2300mm FOLDED
WIDTH OF CUT 3.7 METRES
NUMBER OF ROTORS 4
NUMBER OF BLADES PER ROTOR 2 WITH 360 DEGREE ROTATION
BLADE SPEED 1500 RPM AT 540 PTO RPM
POWER REQUIREMENT 40 TO 70 HP
DRIVE PROTECTION VEE BELT
SAFETY STEEL GUARDS ON DRIVE LINE. STEEL AND RUBBER DECK SKIRTS FOR BLADE PROTECTION
HYDRAULICS SINGLE ACTING 200mm RAM
HEIGHT ADJUSTMENT 0 TO 75mm USING INDEPENDENT WHEEL ADJUSTMENTS
FRONT TYRES 500 X 8 8PLY (OPTIONAL 18 X 850 X 8 4 PLY)
REAR TYRES 350 X 6 4PLY (OPTIONAL 15 X 500 X 6 4PLY)
FOLDING STANDARD HAND WINCH (OPTIONAL HYDRAULIC)
BELTS B SECTION - 2 PER ROTOR
PULLEYS STEEL TAPERLOCK B SECTION
GEARBOXES 40HP - 1.93:1 RATIO
PTO HEADS 1 3/8" 6 SPLINE ON SEALED BEARINGS
PTO SHAFTS INPUT - 6 SERIES GEARBOX - 4 SERIES
DRAWBAR 25.4mm BALL SWIVEL AND ADJUSTABLE SUPPORT JACK

Make an enquiry

 

Thousands of Parts

Acres of new and used parts on site.

Machinery and tractors bought and sold.  Genuine and non-genuine parts stocked and sourced along with a wide range of implements and attachments.  Stockists of Bare Co and Sparex products along with a wide range of Gulf Western oils.

 

Based in Torbay

20kms west of Albany, on the South Coast of Western Australia, the small township of Torbay has been home to "Wilsons" for the past 34 years. Since 1999 quality farm machinery has been designed and built on site by Wilson Machinery. Meanwhile Wilson Wrecking continues to grow as one of the largest agricultural wrecking yards in WA.

Open 5 1/2 Days

Monday - Friday 8am to 5pm

Saturday 8.30am to 12pm

Agents for:

Bare-Co
Sparex
Digga
Schaffer
Intermercato
Gulf Western Oil